Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Let’s discover in this brief and simple guide how to install the rev limiter on the Derbi Senda, following the instructions below. First, remove the flywheel cover by unscrewing the side screws; now, take off the flywheel by unscrewing the central nut and using the appropriate puller, as shown in the video. At this point, make the necessary modifications for the rev limiter by connecting the cable and the control unit to the battery; finally, reassemble the flywheel and its cover or side casing, following the video tutorial to the end!

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads of the Derbi Senda 125?
How to Replace the Rear Brake Pads of the Derbi Senda 125?
Senda 125 To replace the rear brake pads of the Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely re…
How to Install the Lifting Kit on a Derbi Senda 125
How to Install the Lifting Kit on a Derbi Senda 125
Senda 125 To install the lifting kit on the Derbi Senda 125, loosen the screws securing the exhaust at the front and then at the bottom. Once the screws are lo…
How to Replace the Rear Brake Pads on a Derbi Senda 125?
How to Replace the Rear Brake Pads on a Derbi Senda 125?
Senda 125 To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely remo…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos