Do it yourself
Frequently asked questions about cars and motorcycles
To change the engine oil on the Derbi Terra 125, loosen the drain plug located at the bottom centre of the bike: once the plug is loosened, all the used oil can flow into a suitably positioned container. When the oil has completely drained, loosen the bolt securing the oil filter, located on the lower right side of the bike, near the corresponding footpeg. By also replacing the filter, you can then top up by pouring oil through the breather located on the lower left side of the bike.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Terra 125 In today's video, you will see how to inspect the clutch and change the engine oil on a Derbi Terra 125 in simple and quick steps. First, remove the …
Terra 125 You can replace the exhaust on a Derbi Terra 125 by loosening the screws that secure the exhaust end can to its housing, located near the rear mudgua…
Terra 125 To replace the air filter on the Derbi Terra 125, loosen the screws securing the side cover panel of the bike, located near the seat: once the screws…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos