Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Lever Spring on a Derbi Senda?

Model: Derbi Senda 125
Part: Checks and maintenance

Video tutorial

To replace the starter lever spring on a Derbi Senda, first loosen the nut that secures the lever to its mount, located on the right side of the bike in the lower central position. Once the lever is removed, you can loosen the screws securing the cover underneath, which houses the starter motor.

By removing the cover, you will gain access to the motor below, allowing you to remove and replace the corresponding spring with a new one; after replacement, refit the cover and the lever.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

Replacing Front Headlight Bulb on Derbi Senda
Replacing Front Headlight Bulb on Derbi Senda
Senda 125 Today, learn how to remove and replace the front headlight bulb on a Derbi Senda 125. First, remove the fixing screws of the front headlight and take…
How to Replace the Fork Seal on a Derbi Senda?
How to Replace the Fork Seal on a Derbi Senda?
Senda 125 To replace the fork seal on a Derbi Senda, unscrew the bolts that secure the fork to its housing: these are located at the bottom of the fork and at …
How do you disassemble the engine of the Derbi Senda 125?
How do you disassemble the engine of the Derbi Senda 125?
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that hold it to its housing in the center of the frame: once the fixi…

How to Change the Engine Oil in the Yamaha MT-15?

In this tutorial, you will learn how to change the engine oil in the Yamaha MT-15, a very simple and quick operation. First, ensure that the engine is cool enough. Then, position a container beneath the motorcycle, locate the drain bolt, and loosen it using a socket spanner. Allow all the oil in the system to drain out. Next, open the filter cap and insert the replacement. Finally, reassemble everything and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos