Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Derbi Senda 125
Part:

To replace the fork seal on a Derbi Senda, unscrew the bolts that secure the fork to its housing: these are located at the bottom of the fork and at the top, just below the handlebars. Once all the bolts are loosened, you can completely detach the fork and leverage inside its housing to remove the seal present inside; after removing the old seal, insert the new one and refit the fork to its position.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Fork Oil on the Derbi Senda
Replace the Fork Oil on the Derbi Senda
Senda 125 Today, we will see, in this brief guide, the main instructions that will allow us to replace the oil in the front forks of the Derbi Senda enduro mot…
How to Remove the Fork of the Derbi Senda 125?
How to Remove the Fork of the Derbi Senda 125?
Senda 125 To remove the fork of the Derbi Senda, loosen the nut that secures the central axle of the front wheel, allowing it to be completely withdrawn. Befor…
How to Remove the Forks from a Derbi Senda 125?
How to Remove the Forks from a Derbi Senda 125?
Senda 125 To remove the forks from a Derbi Senda 125, loosen the screws securing the brake caliper to the brake disc. Once the caliper is free, you can remove …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos