Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fork of the Derbi Senda 125?

Model: Derbi Senda 125
Part:

Video tutorial

To remove the fork of the Derbi Senda, loosen the nut that secures the central axle of the front wheel, allowing it to be completely withdrawn. Before removing it, you must unscrew the bolts securing the brake caliper, disconnecting it from the brake disc as well.

Once the wheel has been fully removed, unscrew the bolt that secures the fork from the top and remove it completely. The new replacement part should be properly lubricated before securing it with the appropriate bolts.


Updated on 1 June 2026 by ScegliAuto


Related tutorials

Senda 125 To replace the fork seal on a Derbi Senda, unscrew the bolts that secure the fork to its housing: these are located at the bottom of the fork and at …
Senda 125 Today, we will see, in this brief guide, the main instructions that will allow us to replace the oil in the front forks of the Derbi Senda enduro mot…
Senda 125 To remove the forks from a Derbi Senda 125, loosen the screws securing the brake caliper to the brake disc. Once the caliper is free, you can remove …

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos