Do it yourself
Frequently asked questions about cars and motorcycles

Model: Derbi Senda 125
Part:

To remove the forks from a Derbi Senda 125, loosen the screws securing the brake caliper to the brake disc. Once the caliper is free, you can remove it from its housing by unscrewing the bolts that secure the forks at the top. When these screws near the handlebars are also loosened, you can completely remove the forks and, if necessary, remove the front wheel as well. At this point, insert the new forks, securing them with the bolts, and reinstall the front wheel and corresponding brake caliper.

Updated on 19 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Senda 125 To remove the fork of the Derbi Senda, loosen the nut that secures the central axle of the front wheel, allowing it to be completely withdrawn. Befor…
Senda 125 To replace the fork seal on a Derbi Senda, unscrew the bolts that secure the fork to its housing: these are located at the bottom of the fork and at …
Senda 125 Today, we will see, in this brief guide, the main instructions that will allow us to replace the oil in the front forks of the Derbi Senda enduro mot…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos