Do it yourself
Frequently asked questions about cars and motorcycles
Today's guide will show you the procedure to perform the service and change the transmission oil on the Derbi Senda 50 enduro motorcycle, as well as the 125. First, drain the gear oil by unscrewing the drain bolt located under the engine; then clean the drain plug of any metallic debris, and subsequently unscrew the fill plug. At this point, pour in the new gear oil, having the correct specifications (in this case, a 10W40 oil); fill until you reach the maximum level mark!

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Senda 50cc The replacement of the gearbox oil of the Derbi Senda 50 can be carried out by removing the protective plate located in the central lower part of the…
Senda 50cc You can change the engine oil on a Derbi Senda 50 by unscrewing the drain plug located at the central lower part of the vehicle: once the plug is rem…
Senda 50cc This operation must be performed with the engine cold. Before starting, position your Derbi Senda 50 on the side stand. Begin by disconnecting the ca…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos