Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The replacement of the gearbox oil of the Derbi Senda 50 can be carried out by removing the protective plate located in the central lower part of the motorcycle: once this plate has been removed, it will be possible to proceed by loosening the drain plug located in the central lower part of the vehicle to drain the oil. At this point, it will be necessary to collect it in a properly positioned container: then you can proceed with topping up. The necessary amount of oil must be poured from the vent located on the right side of the motorcycle.

Posted on 30 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gear Oil on a Derbi Senda 50 - 125
How to Change the Gear Oil on a Derbi Senda 50 - 125
Senda 50cc Today's guide will show you the procedure to perform the service and change the transmission oil on the Derbi Senda 50 enduro motorcycle, as well as …
How to Replace the Engine Oil of the Derbi Senda 50?
How to Replace the Engine Oil of the Derbi Senda 50?
Senda 50cc To replace the engine oil of the Derbi Senda 50, unscrew the oil drain plug located at the central lower part of the bike: once this is removed, allo…
How to Change the Engine Oil on a Derbi Senda 50?
How to Change the Engine Oil on a Derbi Senda 50?
Senda 50cc You can change the engine oil on a Derbi Senda 50 by unscrewing the drain plug located at the central lower part of the vehicle: once the plug is rem…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos