Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Derbi Terra 125
Part: Engine

In order to remove the engine of the Derbi Terra 125, you need to loosen the screws that secure the side protection panels of the frame: once these panels have been freed, it will be possible to completely detach them, so that you have access to the underlying engine block. The engine block must be removed from its housing by loosening all the screws that secure it to the frame supports: in this way, you can proceed by disconnecting the intake and exhaust pipes; once all the connectors have been disconnected, you can remove the engine block from its seat, replacing it with a new one.

Posted on 13 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Clutch Inspection and Engine Oil Change on a Derbi Terra 125
Clutch Inspection and Engine Oil Change on a Derbi Terra 125
Terra 125 In today's video, you will see how to inspect the clutch and change the engine oil on a Derbi Terra 125 in simple and quick steps. First, remove the …
How do you disassemble the engine of the Derbi Terra 125?
How do you disassemble the engine of the Derbi Terra 125?
Terra 125 To disassemble the engine of the Derbi Terra 125, you need to loosen the screws that fix the block to its housing located in the center of the frame:…
How to Change the Engine Oil on the Derbi Terra 125?
How to Change the Engine Oil on the Derbi Terra 125?
Terra 125 To change the engine oil on the Derbi Terra 125, loosen the drain plug located at the bottom centre of the bike: once the plug is loosened, all the u…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos