Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of the Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Door trim panel

Below we will see the instructions that will allow us to disassemble and replace the rear door panel of the Dodge Journey. First, we open the rear door of the vehicle and start by removing the screw located on the handle; then we unscrew the additional screws located on the sides of the panel, as shown in the video. At this point, we pry on the sides of the panel to detach it and remove it, disconnecting the opening handle cable found on the back; if necessary, replace the panel or internal components, reattaching the door panel!

Posted on 12 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the door panel of the Dodge Journey
Disassembly of the door panel of the Dodge Journey
Dodge Journey (2008-2020 / MK 1) Following these simple instructions, we will see how to disassemble the front door panel of the Dodge Journey. First, we open the front door of the c…
How to remove the exterior handle of a Dodge Journey
How to remove the exterior handle of a Dodge Journey
Dodge Journey (2008-2020 / MK 1) Replacing the damaged handle on a Dodge Journey, let's see how it is assembled and disassembled. Remove the cap from the hole on the door (as shown i…
Replacement of the external door handle of the Dodge Journey.
Replacement of the external door handle of the Dodge Journey.
Dodge Journey (2008-2020 / MK 1) Let's briefly see the instructions that will allow us to disassemble and replace the external handle of the front door of the Dodge Journey. First, w…

How to Replace a Headlight Bulb on a Ford Focus

How do you replace a rear headlight bulb on a Ford Focus? Let's see how to do it in this video. This operation is very simple to carry out. Open the boot and remove the plastic cover from the side trim. Unscrew the retaining screws of the lamp unit, then pull it out by hand from the car's bodywork. Disconnect the power connectors, taking care not to damage them. Once the rear light is removed, replace the damaged bulbs. After completing this operation, reassemble everything in reverse order. Finally, check that the lights are functioning correctly.

Watch the video!


by ScegliAuto

More videos