Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of the door panel of the Dodge Journey

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Door trim panel

Following these simple instructions, we will see how to disassemble the front door panel of the Dodge Journey. First, we open the front door of the car and start unscrewing all the fixing screws located on the door panel and on the sides of it; we pry it to detach and remove it, disconnecting the opening handle cable and the electric connector of the window switch, as shown in the video. At this point, we access the inside of the door, replacing the panel if necessary, following the video tutorial until the end!

Posted on 24 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Dodge Journey (2008-2020 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the rear door panel of the Dodge Journey. First, we open the rear do…
Dodge Journey (2008-2020 / MK 1) How to remove the door panel? Let's look at removing the panel of a Journey. Use a lever to remove the plastic cover above the internal handle, then …
Dodge Journey (2008-2020 / MK 1) Here’s how to remove the panel from the Dodge Journey. Unscrew the screws inside the handle and in the space where the door opening lever is located …

Other guides you may be interested in

How to Open the Fuel Filler Cap of the 2020 Hyundai Tucson

The 2020 Hyundai Tucson has two methods for opening the fuel filler flap. Both methods can only be used if the key has been removed from the ignition and the engine is off. The first method involves removing the key from the ignition and keeping all the car locks open, then go to the flap and press it. This will open the flap. The second method is to stay in the car, remove the key from the ignition, and then press the fuel filler release button located on the left door.

Watch the video!


by ScegliAuto

More videos