Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Dodge Caliber MK 1 - Years 2006-2012
Part: Cabin air filter

This tutorial explains how to replace the cabin air filter in a Dodge Caliber. The filter box is located in the glove compartment on the passenger side; you need to unclip both arms that allow the flap to open and close. Once this is done, you will have access to the filter box, which must be opened by pressing on the two side tabs of its cover. Now, extract the old filter by simply pulling it out, then insert a new filter in the same position as the previous one. Close the filter box and reclip the arms of the glove compartment flap.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Dodge Caliber air filter replacement
Dodge Caliber air filter replacement
Dodge Caliber (2006-2012 / MK 1) In the following video tutorial we will see how to remove and replace the engine air filter of a Dodge Caliber. First we open the bonnet of our car a…
Starter Motor Replacement
Starter Motor Replacement
Dodge Caliber (2006-2012 / MK 1) The starter motor is located on the gearbox, just below the air filter housing. Start by disconnecting the battery and removing the cover of the air …
Dodge Caliber Pollen Filter Replacement
Dodge Caliber Pollen Filter Replacement
Dodge Caliber (2006-2012 / MK 1) In this simple video tutorial we will see how to disassemble and replace the pollen filter of a Dodge Caliber. The filter is located in the part of t…

Other guides you may be interested in

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos