Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Citroen Ds remote control

Model: DS DS Various
Part: Key

This video is currently unavailable

Today we will explain with the help of this simple and short video tutorial how to replace the battery of the Citroen DS key remote. We start the battery replacement by pressing the side button of the remote to remove the emergency metal key stored inside the remote.

We continue the replacement by inserting a flat tip screwdriver into the slot and applying slight pressure from the inside out to remove the cover of the remote. We then replace the battery with a new CR 2032 model and complete all the steps by putting the cover back on and then the key inside the remote.


Posted on 25 April 2025 by ScegliAuto


Related tutorials

DS DS Various The vehicle we are addressing is a Citroen DS 4, specifically the series produced in 1974, thus classified as a historic vehicle. Being dated, it goe…
DS DS Various The procedure to reset the DSG6 automatic gearbox is straightforward and does not require external diagnostic tools. First, turn on the ignition and …
DS DS Various To replace the DSG gearbox oil, loosen the drain plug located at the bottom of the gearbox, accessible from underneath the engine bay. Once this plug…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos