Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port on a DS 3?

Model: DS DS 3 MK 1 - Years 2015-2018
Part: Checks and maintenance

If you own a first-generation DS 3 and are wondering where the OBD port is located, just read the following instructions and follow the steps. It only takes a few seconds. First, open the driver's side door, then remove the plastic cover located on the left side of the dashboard. After removing it by hand, simply locate the OBD port you were looking for and you’re done. If necessary, connect a diagnostic tool to access the ECU.

Posted on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you program the key of the DS 3?
How do you program the key of the DS 3?
DS DS 3 (2018-2026 / MK 2) In order to program the key of the DS 3, you need to connect a diagnostic tool to the OBD port of the vehicle, which is located on the dashboard just…
How do you program the key of the DS 3 Crossback?
How do you program the key of the DS 3 Crossback?
DS DS 3 (2018-2026 / MK 2) In order to program the key of the DS 3 Crossback, you need to insert the blank key into the corresponding slot: this will also allow you to connect …
How to set up the satellite navigation system on a DS 3 MK1.
How to set up the satellite navigation system on a DS 3 MK1.
DS DS 3 (2015-2018 / MK 1) Let's see how to set up the satellite navigator on a DS3 MK1 with the touchscreen system: from any screen, press the physical "menu" button located a…

How to Remove the Center Console on a Mercedes C-Class

Let's see how to remove the center console on a Mercedes C-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center console. Remove the leather shift boot along with its plastic frame. After removing the cover, unscrew the fastening screws located at the top of the center console with a screwdriver. Once this is done, pull the console away and disconnect the power cables for the knob. Finally, insert the new piece into the center console area and reassemble all the components of the glove compartment as you disassembled them earlier.

Watch the video!


by ScegliAuto

More videos