Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light on Citroen Ds4

Model: DS DS 4 MK 1 - Years 2011-2018
Part: Tire pressure warning light

Each time the maintenance service provided for the car is carried out, which includes the replacement of the oil and the relative filter, it will be necessary to reset the Service warning light on the display in the center of the dashboard, to do this it is necessary to identify on the lower part of the instrument panel on the right side the control marked with the symbol of the wrench. Then with the ignition off, press and hold this command and at the same time turn on the panel, wait a few seconds until the service signal is canceled.

Posted on 27 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure on the Citroen DS4.
How to reset the tire pressure on the Citroen DS4.
DS DS 4 (2021-2026 / MK 2) Let's see how to reset the tire pressure monitoring system on a Citroen DS4: let's sit in the driver's seat and turn on the vehicle's electrical syst…
How do you reset the service light on a Citroen DS4?
How do you reset the service light on a Citroen DS4?
DS DS 4 (2011-2018 / MK 1) We changed the motor oil in our Citroen DS4 but the service light is still on in the instrument panel, well, in this very short tutorial we are shown…
How to reset the service light on the Citroen DS4?
How to reset the service light on the Citroen DS4?
DS DS 4 (2011-2018 / MK 1) Performing a service warning light reset on the Citroen DS4 is a very simple operation that can be done independently. To perform the reset, we need …

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos