Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the airbag from the Citroen C3 or DS3

Model: DS DS 3 MK 2 - Years 2018-2026
Part: Airbag

We can see in this video how to remove a partially exploded airbag from the steering wheel of a Citroen C3 or DS3; we turn the steering wheel just enough to see the two holes located laterally in the lower and rear part of the steering wheel itself. We can use two small screwdrivers to insert into the holes; it is better to insert them simultaneously so that they can release the springs inside the steering wheel, which the YouTuber can show us without any problems, since his airbag has already exploded. Once these two springs have been released, we can remove the module, disconnecting the electrical connector and replacing it; we can find it for example on eBay with the code 196431186042 at the price of 90.00 euros + 10.00 euros for shipping.

Posted on 14 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the airbag of the DS3
How to disassemble the airbag of the DS3
DS DS 3 (2018-2026 / MK 2) In today's article we will see how to disassemble the airbag of the DS3 in order to replace it. The only tool needed for this procedure is a flathead…
How to reset the service light on a Citroen DS3
How to reset the service light on a Citroen DS3
DS DS 3 (2018-2026 / MK 2) In this tutorial, you can observe how to perform the procedure to reset the service light in a Citroen DS3 car. Get into the car and press and hold t…
How to replace the fuel filter in the Citroen DS3?
How to replace the fuel filter in the Citroen DS3?
DS DS 3 (2018-2026 / MK 2) In this tutorial, we can see how to replace the fuel filter in the Citroen DS3, an extremely simple and quick operation. First of all, make sure that…

Other guides you may be interested in

How to Remove the Front Brake Rotor on a BMW X3

Let's see how to remove the front brake rotor on a BMW X3. Position your car on a column lift and raise it to a comfortable height for working. Loosen the bolts with a socket wrench or air drill and remove the wheel, then start loosening the bolts of the brake caliper to detach it from the bracket, using a screwdriver to remove the brake pads. Now remove the caliper bracket and loosen the bolts on the brake rotor (using a Torx screwdriver), pull the rotor towards you to slide it off the wheel hub. Install the new brake rotor with all the associated bolts, tighten the caliper bracket to the rotor and the brake pads, then install the brake caliper, making sure to tighten all the bolts securely. Before mounting the wheel, bleed the brake caliper and then tighten the bolt. Finally, install the wheel with the bolts.

Watch the video!


by ScegliAuto

More videos