Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the motor oil of the Ducati Hypermotard?

Model: Ducati Hypermotard
Part: Engine oil

Video tutorial

The engine oil in the Ducati Hypermotard system can be replaced by unscrewing the drain plug of the tank, which will be located in the central lower part of the vehicle. Once the oil has completely drained out, it must be collected in a container placed in the right position: next to the drain plug there will be the oil filter, which can be removed from its housing and replaced with a new spare part.

Once the piece has been removed, it will be possible to top up the oil by inserting the new oil into the breather located on the crankcase on the right side of the vehicle.


Posted on 17 March 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Ducati Hypermotard?
How to Change the Engine Oil of the Ducati Hypermotard?
Hypermotard To change the engine oil of the Ducati Hypermotard, remove the drain plug located at the central lower part of the bike. Once the oil has drained out…
How to Change Engine Oil on a Ducati Hypermotard
How to Change Engine Oil on a Ducati Hypermotard
Hypermotard Start by positioning your Ducati Hypermotard vertically using a motorcycle stand. Then, run the engine for a few minutes. After that, unscrew and rem…
How do you replace the motor oil of the Ducati Hypermotard?
How do you replace the motor oil of the Ducati Hypermotard?
Hypermotard On the Ducati Hypermotard, all the engine oil can be replaced by loosening the drain plug of the oil pan, located in the central lower part of the ve…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos