Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the air filter of the Ducati Multistrada V4S by removing the two fairings located on the left side of the motorcycle, immediately below the handlebars. At this point, you will also need to detach the fairing located above the fuel tank by loosening the corresponding screws. The same operation will need to be carried out to remove the seat. Once all parts have been removed, it will be possible to access the air filter box, located immediately below the handlebars. After opening the box by loosening the fixing bolts, it will be possible to remove the filter and insert the new one.

Posted on 4 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Ducati Multistrada V4S?
How to Replace the Air Filter on the Ducati Multistrada V4S?
Multistrada V4s Below are the instructions for the disassembly and replacement of the air filter for the Ducati Multistrada V4S engine. First, place the bike on a st…
How do you replace the air filter of the Ducati Multistrada V4S?
How do you replace the air filter of the Ducati Multistrada V4S?
Multistrada V4s To replace the air filter on the Ducati Multistrada V4S, you will need to loosen the screws that secure the seat of the motorcycle to its housing, di…
Change the engine oil and oil filter on a Ducati Multistrada V4S
Change the engine oil and oil filter on a Ducati Multistrada V4S
Multistrada V4s This guide will show you how to perform routine maintenance by changing the engine oil and oil filter on a Ducati Multistrada V4S. First, place the m…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos