Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ducati
    3. : Multistrada V4s

Ducati Multistrada V4s - Videoguide

Ducati Multistrada V4s
How to change the engine oil in the Ducati Multistrada V4 S?
In this tutorial, we can see how to replace the engine oil in the Ducati Multistrada V4 S, a very simple and quick operation. First of all, we wait for the …read all…
Posted on 16 January 2024 by ScegliAuto
Ducati Multistrada V4s
How to replace the rear tire of the Ducati Multistrada V4.
Below we will see the steps that will show us how to disassemble and replace the rear tire of the Ducati Multistrada V4 motorcycle. First, we put the bike on …read all…
Posted on 5 January 2024 by ScegliAuto
Ducati Multistrada V4s
How do you replace the horn on the Ducati Multistrada V4S?
In order to replace the horn on the Ducati Multistrada V4S, you need to loosen the screws that fix the panel located in the lower part of the front fairing of …read all…
Posted on 7 December 2022 by ScegliAuto
Ducati Multistrada V4s
How do you replace the windshield on the Ducati Multistrada V4S?
In order to replace the windshield of the Ducati Multistrada V4S it is necessary to loosen the screws that fix the three parts that make it up to the front of …read all…
Posted on 7 November 2022 by ScegliAuto
Ducati Multistrada V4s
Change the Ducati Multistrada V4S engine oil and oil filter
Today's guide will show us how to carry out the routine maintenance service, replacing the engine oil and oil filter, of the Ducati Multistrada V4S. First we …read all…
Posted on 26 September 2022 by ScegliAuto
Checks and maintenance (1) Engine oil (2) Windshield (1) Tires (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos