Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide will show you how to perform routine maintenance by changing the engine oil and oil filter on a Ducati Multistrada V4S. First, place the motorcycle on its centre stand and begin loosening the drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then remove the screws from the oil filter cover, replacing the cartridge with a new one as shown in the video. Now, unscrew the filler cap and top up with the appropriate oil for your engine!

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Ducati Multistrada V4S?
How do you replace the engine oil of the Ducati Multistrada V4S?
Multistrada V4s In order to replace the motor oil of the Ducati Multistrada V4S, you need to loosen the drain plug of the oil pan located on the bottom left of the v…
How to Replace the Air Filter on the Ducati Multistrada V4S?
How to Replace the Air Filter on the Ducati Multistrada V4S?
Multistrada V4s Below are the instructions for the disassembly and replacement of the air filter for the Ducati Multistrada V4S engine. First, place the bike on a st…
How to Change the Engine Oil in a Ducati Multistrada V4 S?
How to Change the Engine Oil in a Ducati Multistrada V4 S?
Multistrada V4s In this tutorial, you will learn how to change the engine oil in a Ducati Multistrada V4 S, a very simple and quick operation. First, ensure the engi…

How to Replace the Spark Plug in a Yamaha FZ 150

In this tutorial, you will see how to replace the spark plug in a Yamaha FZ 150, an extremely simple and quick operation. First, wait until the engine is sufficiently cool and ensure the key is not inserted. Then, move to the right side of the motorcycle and locate the spark plug. Disconnect the power connector, grasp the spark plug with a 16mm socket, and carefully unscrew it. At this point, insert the replacement, tighten it without applying excessive force, and reconnect the connector. Finally, start the engine to verify that the new spark plug functions correctly.

Watch the video!


by ScegliAuto

More videos