Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Ducati Multistrada V4 S?

Model: Ducati Multistrada V4s
Part: Engine oil

Video tutorial

In this tutorial, you will learn how to change the engine oil in a Ducati Multistrada V4 S, a very simple and quick operation. First, ensure the engine is sufficiently cool, then place a container underneath and remove the lower left cover.

Next, locate the drain bolt using a 14mm socket, allow all the oil in the system to drain out, and proceed to open the filter housing. At this point, insert the replacement filter, tighten the bolt, and add the new oil through the designated hole.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

Change the engine oil and oil filter on a Ducati Multistrada V4S
Change the engine oil and oil filter on a Ducati Multistrada V4S
Multistrada V4s This guide will show you how to perform routine maintenance by changing the engine oil and oil filter on a Ducati Multistrada V4S. First, place the m…
How to Change the Engine Oil of the Ducati Multistrada V4S?
How to Change the Engine Oil of the Ducati Multistrada V4S?
Multistrada V4s To change the engine oil of the Ducati Multistrada V4S, you need to loosen the drain plug of the oil sump located at the lower left of the vehicle: o…
How to Change the Engine Oil on a Ducati Multistrada?
How to Change the Engine Oil on a Ducati Multistrada?
Multistrada V4s To change the engine oil on a Ducati Multistrada, start by running the engine for a few minutes to make the oil more fluid and facilitate draining. A…

How to Replace the Front Headlamp Bulb on a Harley-Davidson 883

In this tutorial, see how to replace the front headlamp bulb on a Harley-Davidson 883, a straightforward and quick operation. First, ensure the key is not inserted, then remove the outer ring of the headlamp by unscrewing the relevant bolt. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, release the metal clip, extract the old bulb, and insert the replacement, avoiding direct contact with the glass. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos