Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the coolant of the Ducati 848

Model: Ducati 848
Part: Antifreeze coolant

Video tutorial

In this guide we will see the main instructions that will allow us to drain and then top up the engine coolant of the Ducati 848. First of all, we put the motorcycle on the stand and start by removing the side fairings; then we disconnect the rubber tube of the coolant, loosening the screw of the clamp, letting it drain into a container.

At this point, we unscrew the radiator cap and finally pour the new antifreeze coolant, suitable for our radiator; we check on the tank that the level reaches the maximum mark.


Posted on 31 July 2025 by ScegliAuto


Related tutorials

848 Today, we will guide you on how to bleed and top up the coolant in a Ducati 848, following the instructions below. First, place your motorcycle on a …
848 In this tutorial we can see how to replace the engine oil in the Ducati 848, an extremely simple and fast operation. First of all, we wait for the en…
848 To replace the exhaust on a Ducati 848, loosen the screws that secure the exhaust end can to its housing, located just beneath the rear mudguard. Onc…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos