|
Do it yourself
| |||
| ||||
How to Replace the Coolant in a Ducati 848
Model: Ducati 848
This video is currently unavailable
Today, we will guide you on how to bleed and top up the coolant in a Ducati 848, following the instructions below. First, place your motorcycle on a stand and begin removing the side fairing to access the radiator cap. Next, unscrew the coolant bleed screw (the black one on the water pump cover) and let it drain into a container. Now, unscrew the radiator cap and top up the coolant until it reaches the maximum level mark!
Updated on 15 July 2026 by ScegliAuto
Related tutorials
848
In this guide we will see the main instructions that will allow us to drain and then top up the engine coolant of the Ducati 848. First of all, we pu…
848
To replace the stator on a Ducati 848, you will need to loosen the screws that secure the cover panel on the left side of the vehicle: once the screw…
848
To replace the exhaust on a Ducati 848, loosen the screws that secure the exhaust end can to its housing, located just beneath the rear mudguard. Onc…
|
How to replace the clutch lever on the Sherco SEF 300?
To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
