Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Ducati Monster 696?

Model: Ducati Monster 696
Part: Engine oil

Video tutorial

In this tutorial we can see how to replace the engine oil in the Ducati Monster 696, an extremely simple and quick operation. First of all, make sure that the engine is cold enough, then place a container under the motorcycle, locate the drain plug and unscrew it using a 5mm hex key. Let all the oil in the system drain out, unscrew the side cap with a 14mm hex key, remove the secondary filter and clean it from any residue.

At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate upper hole.


Posted on 14 September 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Ducati Monster 696?
How to Change the Engine Oil in a Ducati Monster 696?
Monster 696 In this tutorial, you will learn how to change the engine oil in a Ducati Monster 696, a very simple and quick operation. First, ensure that the engi…
How to Change the Engine Oil in the Ducati Monster 696?
How to Change the Engine Oil in the Ducati Monster 696?
Monster 696 In this tutorial, you will see how to change the engine oil in the Ducati Monster 696, a very simple and quick operation. First, ensure that the engi…
How to Change the Engine Oil in the Ducati Monster 696?
How to Change the Engine Oil in the Ducati Monster 696?
Monster 696 In this tutorial, see how to change the engine oil in the Ducati Monster 696, a very simple and quick operation. First, wait for the engine to cool d…

How to Clean the Carburettor on an LML Star?

To clean the carburettor on an LML Star, you first need to remove this part from its housing: to disassemble the carburettor, you must remove the right side panel of the scooter, near the rear wheel. Once this panel is removed, you will locate the carburettor underneath by unscrewing the appropriate fixing screws. Then, disconnect the fuel lines and completely remove the carburettor: you can now clean it with a blast of compressed air, then refit all the removed components.

Watch the video!


by ScegliAuto

More videos