Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Ducati Scrambler 800.

Model: Ducati Scrambler 800
Part: Engine oil

Video tutorial

In this guide, we will see the necessary instructions to perform the routine maintenance service by replacing the engine oil and oil filter of the Ducati Scrambler 800. First, we place the motorcycle on the stand and start unscrewing the oil drain bolt located under the engine, using a hex key, allowing the oil to drain into a container for about ten minutes.

Next, we use the appropriate tool to unscrew the oil filter, replacing the cartridge with a new one. At this point, we unscrew the fill cap and pour in the new engine oil, topping up to the correct amount.


Posted on 24 December 2025 by ScegliAuto


Related tutorials

Changing the Engine Oil and Oil Filter on a Ducati Scrambler 800
Changing the Engine Oil and Oil Filter on a Ducati Scrambler 800
Scrambler 800 Today, we will go through the steps and instructions to carry out the routine maintenance service by changing the engine oil and oil filter on the Du…
How to Change the Engine Oil in a Ducati Scrambler 800?
How to Change the Engine Oil in a Ducati Scrambler 800?
Scrambler 800 In this tutorial, you will see how to change the engine oil in a Ducati Scrambler 800, which is an extremely simple and quick task. First, wait until…
How to Change the Engine Oil in the Ducati Scrambler 800?
How to Change the Engine Oil in the Ducati Scrambler 800?
Scrambler 800 In this tutorial, you can see how to change the engine oil in the Ducati Scrambler 800, a very simple and quick operation. First, ensure the engine i…

The First Service at 1,000 Miles on the Honda SH 125

Let's see what needs to be done at the first service for the Honda SH 125 at 1,000 miles. First, change the oil (0.8 litres of original Honda 10W30 oil), clean the metal mesh filter, and reset the service light. Place the scooter on its side stand to allow the oil to drain better, unscrew the drain bolt on the left side, clean the metal mesh filter, replace the sealing ring, unscrew the central bolt, wait for everything to drain, then refit the screws (tightening torque on the side 20 Nm, central 24 Nm); pour in the Honda oil, start the engine for 30 seconds (bike upright, not on the stand). Turn off and wait 2 minutes. Check the level and reset the light by pressing the SET+ button and ignition at the same time.

Watch the video!


by ScegliAuto

More videos