Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will go through the steps and instructions to carry out the routine maintenance service by changing the engine oil and oil filter on the Ducati Scrambler 800. First, place the bike on a stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, replacing it with a new one (tightening gently), as shown in the video. Finally, pour in the oil, adhering to the manufacturer's specifications.

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Ducati Scrambler 800
How to Replace the Battery on a Ducati Scrambler 800
Scrambler 800 The instructions in this guide illustrate the steps to remove and replace the battery on the Ducati Scrambler 800 motorcycle. First, place the motorc…
How to replace the motor oil in the Ducati Scrambler 800?
How to replace the motor oil in the Ducati Scrambler 800?
Scrambler 800 In this tutorial we can see how to replace the engine oil in the Ducati Scrambler 800, an extremely simple and quick operation. First of all, we wait…
How to Replace the Spark Plugs on a Ducati Scrambler 800
How to Replace the Spark Plugs on a Ducati Scrambler 800
Scrambler 800 Follow these step-by-step instructions to remove and replace the spark plugs on the Ducati Scrambler 800 engine. First, place the motorcycle on the c…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos