Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Ducati Scrambler 800, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, then we remove the two exhaust pipes by releasing the respective fixing springs. We then unscrew the bolt of the drain hole, open the cap of the secondary filter and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour the new oil through the appropriate upper hole.

Posted on 17 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Changing the Engine Oil and Oil Filter on a Ducati Scrambler 800
Changing the Engine Oil and Oil Filter on a Ducati Scrambler 800
Scrambler 800 Today, we will go through the steps and instructions to carry out the routine maintenance service by changing the engine oil and oil filter on the Du…
How to replace the engine oil and oil filter of the Ducati Scrambler 800.
How to replace the engine oil and oil filter of the Ducati Scrambler 800.
Scrambler 800 In this guide, we will see the necessary instructions to perform the routine maintenance service by replacing the engine oil and oil filter of the Du…
How to Change the Engine Oil in the Ducati Scrambler 800?
How to Change the Engine Oil in the Ducati Scrambler 800?
Scrambler 800 In this tutorial, you can see how to change the engine oil in the Ducati Scrambler 800, a very simple and quick operation. First, ensure the engine i…

How to Dismantle the TM Racing KZ10C Engine?

To dismantle the TM Racing KZ10C engine, first remove it from its housing by unscrewing the screws that secure it to the respective supports and disconnecting all cables. Once the block is freed, loosen the screws that secure the cylinder so it can be removed from the top; after removal, unscrew the screws that secure the two side casings, removing these as well to access the additional components inside the engine. After replacing the affected parts, close the engine by securing the casings again.

Watch the video!


by ScegliAuto

More videos