Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Ducati Scrambler 800?

Model: Ducati Scrambler 800
Part: Engine oil

Video tutorial

In this tutorial, you can see how to change the engine oil in the Ducati Scrambler 800, a very simple and quick operation. First, ensure the engine is cool enough, then position a container underneath it, locate the drain hole bolt, and unscrew it using an Allen key. Allow all the oil in the system to drain out, then unscrew the secondary filter cap, also unscrewing the filter and cleaning it of any dirt residue.

At this point, simply unscrew the main filter, tighten the replacement, reassemble everything, and pour in the necessary amount of oil through the designated upper hole.


Posted on 10 February 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Ducati Scrambler 800.
How to replace the engine oil and oil filter of the Ducati Scrambler 800.
Scrambler 800 In this guide, we will see the necessary instructions to perform the routine maintenance service by replacing the engine oil and oil filter of the Du…
How to Change the Engine Oil in a Ducati Scrambler 800?
How to Change the Engine Oil in a Ducati Scrambler 800?
Scrambler 800 In this tutorial, you will see how to change the engine oil in a Ducati Scrambler 800, which is an extremely simple and quick task. First, wait until…
Changing the Engine Oil and Oil Filter on a Ducati Scrambler 800
Changing the Engine Oil and Oil Filter on a Ducati Scrambler 800
Scrambler 800 Today, we will go through the steps and instructions to carry out the routine maintenance service by changing the engine oil and oil filter on the Du…

The First Service at 1,000 Miles on the Honda SH 125

Let's see what needs to be done at the first service for the Honda SH 125 at 1,000 miles. First, change the oil (0.8 litres of original Honda 10W30 oil), clean the metal mesh filter, and reset the service light. Place the scooter on its side stand to allow the oil to drain better, unscrew the drain bolt on the left side, clean the metal mesh filter, replace the sealing ring, unscrew the central bolt, wait for everything to drain, then refit the screws (tightening torque on the side 20 Nm, central 24 Nm); pour in the Honda oil, start the engine for 30 seconds (bike upright, not on the stand). Turn off and wait 2 minutes. Check the level and reset the light by pressing the SET+ button and ignition at the same time.

Watch the video!


by ScegliAuto

More videos