Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement on Ducati Diavel

Model: Ducati Diavel
Part: Engine oil

Video tutorial

Descriptive guide for replacing the engine oil and oil filter on a Ducati X Diavel S. Obtain 4 litres of Motul 7100 SAE 15W50 oil and a HIFLO HF153 oil filter. Position the motorcycle on its rear stand.

Start the engine, let it reach temperature, and then switch off. Place a container for collecting the used oil under the engine. Using a ratchet and a 6mm Allen bit, undo the oil drain plug located under the engine.

Allow the oil to drain and clean the plug thoroughly. Use a socket spanner to undo the oil filter located under the engine.

Open the oil filler cap located on the right side of the crankcase. Pour in the oil, referring to the inspection hole located on the lower right side of the crankcase.

Start the engine for one minute and switch off. Check the oil level again.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Ducati Diavel
How to Change the Engine Oil and Oil Filter on the Ducati Diavel
Diavel Let's see how to perform the routine maintenance service by changing the engine oil and oil filter on the Ducati Diavel. First, place the motorcycle …
How to Change the Engine Oil in a Ducati Diavel?
How to Change the Engine Oil in a Ducati Diavel?
Diavel Changing the engine oil in a Ducati Diavel, as shown in this tutorial, is a straightforward and quick task. First, ensure the engine is sufficiently …
How to Change the Engine Oil in the Ducati Diavel
How to Change the Engine Oil in the Ducati Diavel
Diavel In this tutorial, you will see how to change the engine oil in the Ducati Diavel, a very simple and quick operation. First, wait until the engine is …

How to Replace the Levers on the Aprilia RSV4 1000

To replace the levers on the Aprilia RSV4 1000, you need to loosen the nut that secures the lever to its housing: this nut is located at the bottom of the lever, where it is attached to the handlebar. Once the nut is loosened, disconnect the cable attached to it; this will allow you to completely remove the old lever and connect the new one. The new lever can then be secured with the appropriate nut and connected to the corresponding cable to ensure everything functions correctly.

Watch the video!


by ScegliAuto

More videos