Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Oil Filter Replacement for the Ducati Monster 696

Model: Ducati Monster 696
Part: Engine oil

Video tutorial

Today, discover the instructions that will allow you to perform routine maintenance by replacing the engine oil and oil filter of the Ducati Monster 696. First, place the bike on its stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, replacing it with a new one (screw it in by hand and tighten gently).

Finally, unscrew the filler cap and top up with new engine oil!


Posted on 18 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Ducati Monster 696?
How to Change the Engine Oil in a Ducati Monster 696?
Monster 696 In this tutorial, you will learn how to change the engine oil in a Ducati Monster 696, a very simple and quick operation. First, ensure that the engi…
How to Change the Engine Oil in the Ducati Monster 696?
How to Change the Engine Oil in the Ducati Monster 696?
Monster 696 In this tutorial, see how to change the engine oil in the Ducati Monster 696, a very simple and quick operation. First, wait for the engine to cool d…
How to Change the Engine Oil in the Ducati Monster 696?
How to Change the Engine Oil in the Ducati Monster 696?
Monster 696 In this tutorial, you will see how to change the engine oil in the Ducati Monster 696, a very simple and quick operation. First, ensure that the engi…

How to Clean the Carburettor on an LML Star?

To clean the carburettor on an LML Star, you first need to remove this part from its housing: to disassemble the carburettor, you must remove the right side panel of the scooter, near the rear wheel. Once this panel is removed, you will locate the carburettor underneath by unscrewing the appropriate fixing screws. Then, disconnect the fuel lines and completely remove the carburettor: you can now clean it with a blast of compressed air, then refit all the removed components.

Watch the video!


by ScegliAuto

More videos