Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati Hypermotard
Part:

To perform this operation, you will need a 4mm Allen key and a 10mm socket. Start by removing the plastic cover protecting the lever. Then, unscrew the 10mm nut located at the bottom of the lever. Unscrew the upper screw with the 4mm Allen key. Remove the lever by extracting the piston from the pump. Insert the piston already present in the new lever into the pump. Refit the lever stop at the top of the lever and tighten it with the 4mm Allen key. Insert the lower 10mm nut and tighten it fully. Refit the plastic cover for protection.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Cable on a Ducati Hypermotard 821
How to Replace the Clutch Cable on a Ducati Hypermotard 821
Hypermotard In today's video tutorial, we will see the instructions for removing and replacing the clutch cable on the Ducati Hypermotard 821 motorcycle. First, …
How do you replace the motor oil of the Ducati Hypermotard?
How do you replace the motor oil of the Ducati Hypermotard?
Hypermotard The replacement of the motor oil of the Ducati Hypermotard is done by loosening the drain plug of the oil pan, located in the central bottom part of …
How to Replace the Engine Oil of the Ducati Hypermotard?
How to Replace the Engine Oil of the Ducati Hypermotard?
Hypermotard To replace the engine oil of the Ducati Hypermotard, unscrew the drain plug located at the central lower part of the motorcycle. Once all the oil has…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos