Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video tutorial, we will see the instructions for removing and replacing the clutch cable on the Ducati Hypermotard 821 motorcycle. First, place the bike on a stand and start loosening the adjuster found on the clutch lever; then, pull the cable out from the bottom, also unscrewing the adjuster from the clutch cover as shown in the video. At this point, install the new cable along with the sheath, securing it to the clutch cover and the gear lever; finally, adjust it, following the video tutorial to the end!

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb in the Ducati Hypermotard 821?
How to replace the headlight bulb in the Ducati Hypermotard 821?
Hypermotard In this tutorial, we can see how to replace the headlight bulb in the Ducati Hypermotard 821, an extremely simple and quick operation. First of all, …
Replacing the Rear Brake Pads on the Ducati Hypermotard 821
Replacing the Rear Brake Pads on the Ducati Hypermotard 821
Hypermotard Today's instructions will guide you through the dismantling and replacement of the rear brake pads on the Ducati Hypermotard 821. First, place the mo…
Disassembly of the fuel tank of the Ducati Hypermotard 821
Disassembly of the fuel tank of the Ducati Hypermotard 821
Hypermotard Below we will see the main instructions on how to disassemble and replace the fuel tank of the Ducati Hypermotard 81 motorcycle. First, we put the mo…

How to replace the exhaust on a Derbi Atlantis

Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos