Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati Hypermotard
Part:

Below we will see the main instructions on how to disassemble and replace the fuel tank of the Ducati Hypermotard 81 motorcycle. First, we put the motorcycle on the stand and start by removing the rider's seat and the plastic side fairings; then we unscrew the screws of the bracket found at the bottom of the tank, in order to lift it, as shown in the video. At this point, we disconnect the fuel lines and the electrical connector of the fuel level sensor; we carry out the repair or replacement of the tank, reassembling the previously disassembled components.

Posted on 13 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads on the Ducati Hypermotard 821
Replacing the Rear Brake Pads on the Ducati Hypermotard 821
Hypermotard Today's instructions will guide you through the dismantling and replacement of the rear brake pads on the Ducati Hypermotard 821. First, place the mo…
How to replace the headlight bulb in the Ducati Hypermotard 821?
How to replace the headlight bulb in the Ducati Hypermotard 821?
Hypermotard In this tutorial, we can see how to replace the headlight bulb in the Ducati Hypermotard 821, an extremely simple and quick operation. First of all, …
How to Replace the Clutch Cable on a Ducati Hypermotard 821
How to Replace the Clutch Cable on a Ducati Hypermotard 821
Hypermotard In today's video tutorial, we will see the instructions for removing and replacing the clutch cable on the Ducati Hypermotard 821 motorcycle. First, …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos