Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's instructions will guide you through the dismantling and replacement of the rear brake pads on the Ducati Hypermotard 821. First, place the motorcycle on a stand and begin unscrewing the bolts securing the rear brake caliper, removing it from the disc (applying pressure to the caliper piston); then remove the old brake pads as shown in the video. At this point, clean the caliper of any residual dirt, install the new original brake pads, and refit the brake caliper onto the disc, checking for proper operation!

Posted on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads on Ducati Hypermotard
Replacing Front Brake Pads on Ducati Hypermotard
Hypermotard In today's video, you will learn how to remove and replace the front brake pads on a Ducati Hypermotard, as well as on the Multistrada. First, loosen…
How to Replace the Clutch Cable on a Ducati Hypermotard 821
How to Replace the Clutch Cable on a Ducati Hypermotard 821
Hypermotard In today's video tutorial, we will see the instructions for removing and replacing the clutch cable on the Ducati Hypermotard 821 motorcycle. First, …
How to replace the headlight bulb in the Ducati Hypermotard 821?
How to replace the headlight bulb in the Ducati Hypermotard 821?
Hypermotard In this tutorial, we can see how to replace the headlight bulb in the Ducati Hypermotard 821, an extremely simple and quick operation. First of all, …

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos