How to Remove Chain, Sprocket, and Pinion on Ducati 748

Model: Ducati 748
Part:

This video is currently unavailable

Follow these steps to remove the chain, sprocket, and pinion on a Ducati 748. First, remove the safety clip found on the nut of the rear wheel; then unscrew the screws of the chain guard to remove it, as shown in the video. At this point, remove the pinion cover and unscrew the two fixing screws; remove the sprocket bolt using a 41 mm socket spanner, and use a puller to remove the sprocket and chain, also taking off the pinion.

Just follow the video to the end!

Updated on 7 April 2026 by ScegliAuto

Related tutorials

How to Tension the Chain on a Ducati 748?

748 To tension the chain on a Ducati 748, first remove the panel covering the sprocket on the left side of the bike. Once this panel is removed, you will…

Replace Radiator Expansion Tank on Ducati 748-916-996-998

748 In this video tutorial, learn how to remove and replace the radiator expansion tank on a Ducati 748 two-seater, as well as on the 916-996-998 models.…

How to Replace the Clutch on a Ducati 748

748 To replace the clutch on a Ducati 748, you need to loosen the bolts securing the clutch cover located on the right side of the vehicle. Once this cov…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!

by ScegliAuto

How to Remove Chain, Sprocket, and Pinion on Ducati 748

Related tutorials

Replacing the Rear Brake Pads of the BMW G310 GS

More videos