Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Ducati
  4. :
  5. Monster 821
  6. : How to replace the Ducati Monster headlight bulb?

Model: Ducati Monster 821
Part: Light bulb
How to replace the Ducati Monster headlight bulb?

To replace the Ducati Monster headlight bulb you need to loosen the screws located behind the headlight, on the right and on the left. This will allow the headlight to be extracted and removed completely by disconnecting its connectors. Once the headlight has been removed, the protective cover on the rear of the headlight must be unscrewed. Inside there will be the light bulb which must be extracted after opening its fixing clip. At this point it will be possible to insert the new bulb, close the headlight with the cover, connect it and fix it again in front of the bike.


Posted on 27 February 2024 by ScegliAuto

How do you bleed the Gilera Nexus 500 brakes?

In order to bleed the Gilera Nexus 500 brakes, you need to open the drawer that is located in correspondence with the knob, unscrewing the fixing screws of the cover. Once this has been opened, it will be possible to insert a small tube inside the vent on the brake caliper: therefore, by opening the valve, the brake fluid can be collected inside a container. When all the fluid has flowed out, it will be possible to fill in the new brake oil from the vent that was previously opened by removing the cover next to the knob.

Watch the video!


by ScegliAuto

More videos