Do it yourself
Frequently asked questions about cars and motorcycles
Today's tutorial will show you how to remove and replace the spark plugs on the engine of the Piaggio MP3 500 scooter. First, place the scooter on its central stand and begin by removing the plastic side cover by unscrewing the securing screw; then disconnect the spark plug cap and use a 16 mm socket to remove it and replace it with a new one, as shown in the video. Now install the correct spark plug for the engine, ensuring it has the same thread pitch; simply screw it in by hand before tightening gently with a spanner, then reassemble everything!

Updated on 23 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mp3 500 To replace the spark plugs on the Piaggio MP3, you need to loosen the bolt that secures the side cover located in the left footwell of the scooter. O…
Mp3 500 In this tutorial, you will see how to replace the spark plugs on the Piaggio MP3 500 scooter, a very simple and quick operation. First, ensure the ke…
Mp3 500 Remove the plastic cover on the left side of your scooter by unscrewing the single screw and prying it off with a flat screwdriver. At this point, st…

How to Replace the Exhaust on the Husqvarna TE 300i?

To replace the exhaust on the Husqvarna TE 300i, you will need to loosen the screws that secure the exhaust end can to the appropriate mounts located at the rear mudguard: once the screws are loosened, you can proceed by widening the connecting clamp between the exhaust and the manifold. Once the old exhaust is free, you can completely detach it to fit the new one: this can now be secured with the screws and connected to the manifold, ensuring everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos