Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Spark Plug Replacement on Piaggio Mp3 500

Model: Piaggio Mp3 500
Part: Spark plugs

Video tutorial

Remove the plastic cover on the left side of your scooter by unscrewing the single screw and prying it off with a flat screwdriver. At this point, strangely enough, you can already unscrew the two spark plugs using the appropriate socket and a ratchet.

You will notice their wear once removed. It is recommended to replace the spark plugs approximately every 15,000 miles.

Refit the two spark plugs in the same manner as you removed them, ensuring they are seated correctly. Close the cover that was initially removed and check that everything functions correctly.

This is indeed a very simple operation.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Piaggio MP3 500
How to Replace the Spark Plugs on a Piaggio MP3 500
Mp3 500 To replace the spark plugs on the Piaggio MP3, you need to loosen the bolt that secures the side cover located in the left footwell of the scooter. O…
How to Replace the Spark Plugs on a Piaggio MP3 500
How to Replace the Spark Plugs on a Piaggio MP3 500
Mp3 500 Today's tutorial will show you how to remove and replace the spark plugs on the engine of the Piaggio MP3 500 scooter. First, place the scooter on it…
How to Replace the Spark Plugs on the Piaggio MP3 500 Scooter
How to Replace the Spark Plugs on the Piaggio MP3 500 Scooter
Mp3 500 In this tutorial, you will see how to replace the spark plugs on the Piaggio MP3 500 scooter, a very simple and quick operation. First, ensure the ke…

How to Change the Engine Oil in the Suzuki GSX-S1000?

Changing the engine oil in the Suzuki GSX-S1000, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath and remove the lower fairing. Next, locate the drain hole bolt, unscrew it using a socket spanner, and allow all the oil in the system to drain out. At this point, simply unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos