Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Brake Pads on a Ducati Multistrada V4S

Model: Ducati Multistrada
Part: Brake pads

Video tutorial

In today's tutorial, you will see how to remove and replace the front brake pads on the Ducati Multistrada V4S. First, place your bike on the centre stand and start by unscrewing the two fixing screws of the brake caliper using an Allen key; then remove the brake pad retaining clip as shown in the video.

At this point, remove and replace the brake pads with new ones of the correct type and high quality; clean the caliper of any residual dirt and reassemble everything, applying the reverse procedure!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to remove the front wheel of the Ducati Multistrada
How to remove the front wheel of the Ducati Multistrada
Multistrada Today, we will go through the steps to remove and replace the front wheel of the Ducati Multistrada motorcycle. First, place your motorcycle on the c…
How to Change the Engine Oil and Oil Filter on the Ducati Multistrada V4S
How to Change the Engine Oil and Oil Filter on the Ducati Multistrada V4S
Multistrada This guide explains how to perform routine maintenance on the Ducati Multistrada V4S by changing the engine oil and oil filter. First, place the bike…
Replacing Rear Brake Pads on Ducati Multistrada
Replacing Rear Brake Pads on Ducati Multistrada
Multistrada If you have a Ducati Multistrada and it's time to replace the rear brake pads, consider yourself lucky, as this maintenance will take very little tim…

How to Set the Time on the X Max 300

This article explains how to adjust the time on the X Max 300. The procedure takes less than 1 minute. To perform this procedure, press the trip button, holding it to the left, and start the ignition. Once the ignition is on, release the button, and the time will start to flash. Adjust the hour by moving the trip button to the left. Once the hour is set, press the trip button to confirm and adjust the minutes. After setting the minutes, press the trip button again to complete the procedure.

Watch the video!


by ScegliAuto

More videos