Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Pads on Ducati Multistrada

Model: Ducati Multistrada
Part: Brake pads

Video tutorial

If you have a Ducati Multistrada and it's time to replace the rear brake pads, consider yourself lucky, as this maintenance will take very little time. On this motorcycle model, it is not necessary to remove the brake caliper or the wheel to access this, quite the opposite.

Use a specific pliers or any tool to extract the pin of the brake caliper. Pull the pin out of the two holes of the caliper just enough to remove the pads and insert the new ones.

If these do not fit, as they are thicker than the previous ones, lever in their seats to widen the space.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

Replace the Front Brake Pads on a Ducati Multistrada V4S
Replace the Front Brake Pads on a Ducati Multistrada V4S
Multistrada In today's tutorial, you will see how to remove and replace the front brake pads on the Ducati Multistrada V4S. First, place your bike on the centre …
Replacing Brake Pads on Ducati Multistrada
Replacing Brake Pads on Ducati Multistrada
Multistrada Before replacing the brake pads, you need to remove the rear wheel. Once done, you can work on the caliper and widen the space where the pads are loc…
How to remove the front wheel of the Ducati Multistrada
How to remove the front wheel of the Ducati Multistrada
Multistrada Today, we will go through the steps to remove and replace the front wheel of the Ducati Multistrada motorcycle. First, place your motorcycle on the c…

How to Set the Time on the X Max 300

This article explains how to adjust the time on the X Max 300. The procedure takes less than 1 minute. To perform this procedure, press the trip button, holding it to the left, and start the ignition. Once the ignition is on, release the button, and the time will start to flash. Adjust the hour by moving the trip button to the left. Once the hour is set, press the trip button to confirm and adjust the minutes. After setting the minutes, press the trip button again to complete the procedure.

Watch the video!


by ScegliAuto

More videos