Do it yourself
Frequently asked questions about cars and motorcycles

How to install the front wheel on the Ducati XDiavel

Model: Ducati Xdiavel
Part: Wheel

Video tutorial

In today's tutorial video, you will see the necessary instructions to fit the front wheel on the Ducati XDiavel, following these simple steps. First, place the metal bush on the left side of the wheel; then, position it on the axle and insert the central pin, tapping it with a plastic hammer until it is fully seated, as shown in the video.

At this point, tighten the central nut onto the pin; finally, refit and secure the brake calipers, following the video to the end!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

Xdiavel To replace the battery of the Ducati XDiavel S, loosen the screws securing the cover panel located at the lower front of the bike, just behind the fr…
Xdiavel In this tutorial, you will see how to change the engine oil in the Ducati XDiavel, a very simple and quick operation. First, ensure the engine is suf…
Xdiavel In this tutorial, you will see how to change the engine oil in a Ducati XDiavel, a very simple and quick operation to be performed every 12 months. F…

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos