Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Ducati Diavel

Model: Ducati Diavel
Part: Engine oil

Video tutorial

To change the engine oil in the Ducati Diavel, you need to loosen the screws that secure the exhaust mounting rings, which must be completely removed. This will allow access to the oil drain plug located at the bottom of the bike: by opening this plug, you can let the oil flow into a suitably positioned container.

Once the oil has drained, you can remove the oil filter located next to the plug for replacement. Finally, you can top up the oil through the designated hole at the top of the casing on the right side of the bike.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the Ducati Diavel?
How to change the engine oil in the Ducati Diavel?
Diavel Changing the engine oil in the Ducati Diavel, as shown in this tutorial, is an extremely simple and quick operation. First, ensure the engine is cool…
How to Change the Engine Oil in the Ducati Diavel
How to Change the Engine Oil in the Ducati Diavel
Diavel .. In this tutorial, you will see how to change the engine oil in the Ducati Diavel, a very simple and quick operation. First, wait until.. …
How to replace the engine oil in the Ducati Diavel?
How to replace the engine oil in the Ducati Diavel?
Diavel In this tutorial we can see how to replace the motor oil in the Ducati Diavel, a very simple and quick operation. First of all, make sure that the en…

How to Change the Headlight Bulb on the Aprilia Scarabeo 50

In this short and simple guide, you will learn how to disassemble and replace the headlight bulb on the Aprilia Scarabeo 50 scooter, following the instructions below. First, place the scooter on the centre stand and begin by removing the plastic cover located in front of the instrument panel; to do this, unscrew the securing screws found underneath, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove it, replacing it with a new one (with the same fitting); then reassemble the bulb and the optical unit!

Watch the video!


by ScegliAuto

More videos