Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial video, you will see the steps to remove and replace the battery of the Ducati Monster 795, as well as the 797. First, remove the rider's seat from your bike; then unscrew the fastening screws of the fuel tank, which are located at the top and bottom of the bike, as shown in the video. At this point, lift the tank to access the battery; disconnect both terminals (positive and negative) to remove and replace the battery with a new one of the same amperage. Then reassemble everything!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery of a Ducati Monster 795
How to Replace the Battery of a Ducati Monster 795
Monster 797 To replace the battery of a Ducati Monster 795, first lift the seat to access the screws securing the fuel tank. Once these screws are loosened, unsc…
Removing the Fuel Tank from the Ducati Monster 797
Monster 797 .. and replace the fuel tank on the Ducati Monster 797 motorcycle. First, place the bike on a stand and begin by removing the rider's seat. Then, use a.. …
How do you replace the exhaust pipe of the Ducati Monster 797?
How do you replace the exhaust pipe of the Ducati Monster 797?
Monster 797 .. The exhaust pipe of the Ducati Monster 797 can be replaced by loosening the screws that fix the exhaust terminal to the corresponding supports:.. …

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos