|
Do it yourself
| |||
| ||||
Model: Ducati 1098
In today's video, we will see how to remove the fuel tank of the 2007 Ducati 1098 in simple and quick steps. First, remove the rider's seat by unscrewing the side screws; then disconnect the fuel tap hoses found on the right side of the bike, as shown in the video. Next, unscrew the tank screws to lift it; disconnect the remaining hoses underneath and the electrical connector for the fuel level sensor. Finally, remove the tank, applying the reverse procedure for reassembly!
Updated on 30 May 2026 by ScegliAuto
Video tutorial
Related tutorials
1098
Start by sitting on the rider's seat of your Ducati 1098. Next, insert the key into the ignition switch and turn the key to activate the instrument p…
1098
To replace the air filter on a Ducati 1098, loosen all the screws securing the right side panel of the bike just below the fuel tank. This will allow…
1098
In this video tutorial, follow the main instructions to remove the timing belt from a Ducati 1098. First, remove the rider's seat and the fuel tank b…
|
How to replace the exhaust on a Derbi Atlantis
Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.129
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
