Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, we will go through the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Monster 1200. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Next, use the appropriate tool to unscrew and remove the oil filter, then screw in the new one by hand and tighten it. Finally, unscrew the filler cap and pour in the new engine oil until it reaches the maximum level mark!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter of the Ducati Monster 1200
How to Change the Engine Oil and Oil Filter of the Ducati Monster 1200
Monster 1200 Below are the main instructions that will allow you to perform the routine maintenance service by changing the engine oil and oil filter of the Ducat…
How to Replace the Engine Oil and Oil Filter on the Ducati Monster 1200
How to Replace the Engine Oil and Oil Filter on the Ducati Monster 1200
Monster 1200 Today, we will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Ducati Monster 1200. First…
How to Change the Engine Oil of the Ducati Monster 1200 S
How to Change the Engine Oil of the Ducati Monster 1200 S
Monster 1200 This guide outlines the steps to replace the engine oil and oil filter of the Ducati Monster 1200 S, performing routine maintenance. First, remove th…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos