Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide provides the necessary instructions to remove and replace the spark plugs on a Ducati Streetfighter 848. First, place your motorcycle on a stand and start by removing the spark plug located behind the radiator; to do this, remove the spark plug cap and use a socket wrench with an extension to unscrew and remove it, as shown in the video. To access the other spark plug, it will be necessary to remove the fuel tank, as the cylinder head is located directly beneath it; hand-tighten the new spark plugs and tighten them with a torque wrench, following the video until the end!

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Ducati Streetfighter 848
How to Change the Engine Oil on a Ducati Streetfighter 848
Streetfighter 848 To change the engine oil on a Ducati Streetfighter 848, loosen the drain plug located at the bottom centre of the bike. Once loosened, you can collec…
How do you replace the motor oil of the Ducati Streetfighter 848?
How do you replace the motor oil of the Ducati Streetfighter 848?
Streetfighter 848 It will be possible to replace the motor oil of the Ducati Streetfighter 848 by loosening the drain plug of the oil pan, which will be located in the…
How do you replace the motor oil of the Ducati Streetfighter 848?
How do you replace the motor oil of the Ducati Streetfighter 848?
Streetfighter 848 To replace the motor oil of the Ducati Streetfighter 848, you need to loosen the drain plug located in the central lower part of the vehicle: once th…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos