Do it yourself
| ||||
|
Model: Ducati Scrambler
In order to replace the rear-view mirror on the Ducati Scrambler, a hex wrench must be used to remove the counterweight placed on the end of the corresponding knob: after removing the counterweight, it will be possible to position the adapter at the base of the mirror so that it can be inserted into the inside the knob. After the mirror has been inserted, it will be necessary to fix the base of its support by tightening the corresponding screw with the hexagonal key; once the mirror has been fixed, it will need to be adjusted according to your driving needs.
Posted on 6 May 2023 by ScegliAuto
|
How do you replace the front headlight of the Husqvarna 701?The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight, between the front wheel fork and the plastic panel. Once all the screws are loosened, it will be possible to remove the plastic front cover to which the headlight, containing the bulbs, is attached. It will be necessary to disconnect the connector and remove the old bulb from its housing. Then it will be possible to insert the new bulb into its proper seat and connect the connector. Finally, it will be necessary to reassemble the headlight assembly and secure the fairing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.003
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |