|
Do it yourself
| |||
| ||||
How to Check and Top Up the Coolant in a Ducati Diavel 1260S
Model: Ducati Diavel
Video tutorial
Today's guide shows you how to check the coolant level and then top it up on a Ducati Diavel 1260S. First, place the motorcycle on a stand and remove the coolant cap located on the right, behind the frame. Use a torch to check the antifreeze level, ensuring it is at the maximum level mark. If not, top up with the correct type of antifreeze suitable for your radiator, following the video tutorial to the end!
Updated on 24 August 2026 by ScegliAuto
Related tutorials
Diavel
To replace the air filter of the Ducati Diavel 1260S, loosen the screws securing the side panels located just below the fuel tank. Once these are loo…
Diavel
Begin by pressing the button located on the front side of the key fob for your Ducati Diavel, which opens the physical key. Then, you need to prise o…
Diavel
Replacing the remote battery of the Ducati Diavel, as shown in this tutorial, is an extremely simple and quick operation. You will need a replacement…
|
How to Change the Oil in a Peugeot Speedfight 125 Scooter?
In this tutorial, you will see how to change the engine oil in the Peugeot Speedfight 125 scooter, a very simple and quick operation. Before proceeding, ensure that the engine is completely cold for safety. Start by placing a container underneath the scooter, then unscrew the drain bolt located in the lower left area. Once all the oil has drained out, reinsert the bolt, remove the filter, and clean it of any residue. At this point, you can insert new 5W-40 oil through the upper filling hole. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
