Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Ducati Monster 696?

Model: Ducati Monster 696
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in a Ducati Monster 696, a very simple and quick operation. First, wait until the engine is cool enough, then position a container under the bike, locate the drain bolt, and unscrew it using a 10mm hex key. Allow all the oil in the system to drain out, open the secondary filter cap, and clean it of any dirt residue.

At this point, you can unscrew the main filter, tighten the replacement, reassemble everything, and pour in the new oil through the designated hole.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Ducati Monster 696?
How to Change the Engine Oil in the Ducati Monster 696?
Monster 696 In this tutorial, you will see how to change the engine oil in the Ducati Monster 696, a very simple and quick operation. First, ensure that the engi…
How to Change the Engine Oil in the Ducati Monster 696?
How to Change the Engine Oil in the Ducati Monster 696?
Monster 696 In this tutorial, see how to change the engine oil in the Ducati Monster 696, a very simple and quick operation. First, wait for the engine to cool d…
How to Change the Engine Oil in a Ducati Monster 696?
How to Change the Engine Oil in a Ducati Monster 696?
Monster 696 .. In this tutorial, you will learn how to change the engine oil in a Ducati Monster 696, a very simple and quick operation. First, ensure.. …

How to Clean the Carburettor on an LML Star?

To clean the carburettor on an LML Star, you first need to remove this part from its housing: to disassemble the carburettor, you must remove the right side panel of the scooter, near the rear wheel. Once this panel is removed, you will locate the carburettor underneath by unscrewing the appropriate fixing screws. Then, disconnect the fuel lines and completely remove the carburettor: you can now clean it with a blast of compressed air, then refit all the removed components.

Watch the video!


by ScegliAuto

More videos