Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Ducati Hypermotard?

Model: Ducati Hypermotard
Part: Air filter

Video tutorial

To replace the air filter on the Ducati Hypermotard, insert the key into the ignition switch located on the left side of the bike, just under the seat. This will allow you to completely detach the seat and proceed to loosen the screws securing the fuel tank in its housing.

The tank will then need to be removed from its position by disconnecting the connectors and pipes underneath. Below this tank, you will find the air filter box, which can be opened by loosening the screws that secure its cover.

The filter inside can now be removed and replaced with a new spare part.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to replace the air filter on the Ducati Hypermotard?
How to replace the air filter on the Ducati Hypermotard?
Hypermotard To replace the air filter on the Ducati Hypermotard, loosen the screws securing the seat so that it can be removed from its housing. Once the seat is…
How to Change the Engine Air Filter on a Ducati Hypermotard
How to Change the Engine Air Filter on a Ducati Hypermotard
Hypermotard Remove the engine air filter on a Ducati Hypermotard. Follow this guide to replace it. Position the motorcycle on a central stand, remove the seat; u…
How to Replace the Air Filter on a Ducati Hypermotard?
How to Replace the Air Filter on a Ducati Hypermotard?
Hypermotard To replace the air filter on the Ducati Hypermotard, loosen the bolts securing the fairings on the side of the tank. Then, remove the seat and the sc…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos